Project Management and Coordination Contractors in Stem, NC

2,885 Results within

Market Sector
Company Type
Business Classification
Trades and Services (39)
Construction Scheduling
Design Coordination Services
Detention Security Systems
Direct Applied Finish Systems
Exterior Insulation and Finish Systems Eifs
General Construction Management
Information Management and Presentation
Integrated Automation Actuators and Operators
Integrated Automation Battery Monitors
Integrated Automation Compressed Air Supply
Integrated Automation Control and Monitoring Network
Integrated Automation Control Dampers
Integrated Automation Control Valves
Integrated Automation Current Sensors
Integrated Automation Kw Transducers
Integrated Automation Lighting Relays
Integrated Automation Local Control Units
Integrated Automation Network Devices
Integrated Automation Network Gateways
Integrated Automation Power Meters
Integrated Automation Sensors and Transmitters
Integrated Automation Software
Integrated Automation Systems For Communications
Integrated Automation Systems For Conveying Equipment
Integrated Automation Systems For Electrical
Integrated Automation Systems For Electronic Safety
Integrated Automation Systems For Electronic Security
Integrated Automation Systems For Facility Equipment
Integrated Automation Systems For Fire Suppression
Integrated Automation Systems For HVAC
Integrated Automation Systems For Network Equipment
Integrated Automation Systems For Plumbing
Integrated Automation Ups Monitors
Polymer Based Exterior Insulation and Finish System
Polymer Modified Exterior Insulation and Finish System
Project Management and Coordination
Specialized Systems
Value Analysis Engineering
Water Drainage Exterior Insulation and Finish System
Clear All Filters
Company Logo

CG3D LLC

New York, NY • Alabama • Arizona • Arkansas • California • Delaware • Florida • Georgia • Illinois • Indiana • Iowa • Kentucky • Louisiana • Maryland • Massachusetts • Michigan • Minnesota • Missouri • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • Ohio • Oklahoma • Oregon • Pennsylvania • South Carolina • Tennessee • Texas • Utah • Virginia • Washington • West Virginia • Wisconsin
Consultant, Specialty Contractor
Commercial, Healthcare, Industrial and Energy, Infrastructure, Institutional, Residential
3d Capture Scanning, Bim and Model Making Services, Building Information Modeling Bim, Design Coordination Services
Services: 3D Laser Scanning Scan to BIM (MEP, Architectural and Structural) MEP Pre Construction Coordination (Revit w/Fab parts) Welcome to CG3D, your premier destination for cutting-edge 3D scanning and MEP (Mechanical, Electrical, Plumbing) virtual coordination solutions. At CG3D, we are committed to revolutionizing the way you perceive and execute your projects. Harnessing the latest advancements in 3D scanning technology, CG3D captures every detail of your physical environment with unparalleled precision and accuracy. Whether you're dealing with architectural marvels, industrial complexes, or intricate historical sites, our state-of-the-art scanning techniques ensure that every dimension is faithfully represented in the digital realm. But our expertise doesn't end there. With our expertise in Building Information Modeling (BIM), CG3D specializes in seamless 3D MEP virtual coordination. By integrating mechanical, electrical, and plumbing systems into a unified digital model, we empower you to plan, visualize, and coordinate your project with unmatched efficiency and precision. At CG3D, we understand the critical importance of collaboration and precision in modern construction and engineering projects. Our solutions enable architects, engineers, contractors, and facility managers to streamline workflows, mitigate risks, and optimize resources throughout the project lifecycle. Experience the future of 3D scanning and MEP virtual coordination with CG3D. Partner with us, and let's transform your vision into reality, one precise detail at a time.
Company Logo

Goin Design

Alabama • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • Florida • Georgia • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Washington • Wisconsin • Wyoming
Consultant, Specialty Contractor
Commercial, Healthcare, Industrial and Energy, Institutional, Residential
Bim and Model Making Services, Building Information Modeling Bim, Design and Engineering, Design Coordination Services
Digital construction team with more than 20 years of experience in the architectural, engineering, and construction sectors. We have the experience and acumen needed to provide you with the latest BIM solutions and project coordination to fit your budget and project needs. As an SBA-certified, U.S. Veteran-owned business, registered with SAM and SWaM-certified, we are fully equipped to participate in federal and state procurement opportunities, ensuring compliance and reliability. We are experienced detailers and designers specializing in HVAC, Plumbing and BIM/VDC Coordination, based in the United States and Ukraine, are here to provide you the most professional and cost-effective services for your business. Some of the services we can provide : Ability to convert existing physical drawings or sketches into Floor Plans or 3D Models 3D scanning / modeling of existing facilities architectural and structural as-built conditions Conversion and processing of scan clouds into Coordination and/or BIM models 3D Architectural, Structural and MEP modeling and detailing BIM / VDC Coordination Engineering stamp available upon request
Company Logo

Illumine International Inc.

DC, DC • Alaska • Alberta • Arizona • Arkansas • British Columbia • California • Colorado • Connecticut • Delaware • Florida • Georgia • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Manitoba • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Brunswick • New Hampshire • New Jersey • New Mexico • New York • Newfoundland and Labrador • North Carolina • North Dakota • Nova Scotia • Ohio • Oklahoma • Ontario • Oregon • Pennsylvania • Prince Edward Island • Québec • Rhode Island • Saskatchewan • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Consultant, Engineer, Owner Real Estate Developer
Industrial and Energy, Infrastructure
Architectural Design and Engineering, Building Information Modeling Bim, Civil Design and Engineering, Design and Engineering, Design Coordination Services, Electrical Design and Engineering, Electrical Power Generation, Electrical Utilities High and Medium Voltage Distribution, Environmental Assessment, Heating Ventilating and Air Conditioning HVAC, Mechanical Design and Engineering, Preconstruction Bidding, Project Management, Project Management and Coordination, Roof Specialties, Special Structures, Structural Design and Engineering, Surveying, Value Analysis Engineering
At Illumine-i, we are constantly driven by the unwavering passion of a team that thinks, creates, and innovates unconventional. With our decade-young experience in the US Solar ecosystem, we have been serving EPC, Developers, Manufacturers, and Financial Institutions with value-engineered solutions that position them at an advantage to disrupt the market.

Johnson Controls Security and Fire Solutions

North Carolina
Specialty Contractor, Supplier
Commercial, Healthcare, Industrial and Energy, Infrastructure, Institutional
Access Control, Access Doors and Panels, Applied Fire Protection, Design and Engineering, Design Coordination Services, Distributed Communications and Monitoring Systems, Door Hardware, Electronic Life Safety, Electronic Personal Protection Systems, Electronic Security, Emergency Access and Information Cabinets, Emergency Aid Specialties, Emergency Response Systems, Estimating, Exterior Protection, Exterior Specialties, Facility Protection, Fire and Smoke Protection, Fire Detection and Alarm, Fire Extinguishing Systems, Fire Protection Engineering, Fire Protection Specialties, Fire Suppression, Healthcare Equipment, HVAC General, Informational Kiosks, Instrumentation and Control For Fire Suppression System, Instrumentation and Control For HVAC, Integrated Automation Systems For Electronic Security, Integrated Automation Systems For Fire Suppression, Integrated Automation Systems For HVAC, Mass Notification, Preconstruction Bidding, Project Management and Coordination, Temporary Security, Video Monitoring and Documentation, Video Surveillance, Water Detection and Alarm
We are a turn-key Security and Fire Alarm company. From design through installation. Systems we work with include access control, fire alarms, burglar, video surveillance, weapons detection, environment sensors, audio notification, and more. Services include monitoring, inspections, maintenance, systems integration, and more. For full capabilities, please request a meet.
Company Logo

PDC Facilities

Alabama • Alaska • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • District of Columbia • Florida • Georgia • Hawaii • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Specialty Contractor
Healthcare
Radiation Protection, Special Function Doors, Special Function Windows, Special Purpose Rooms, Specialized Systems
Since MRI hit the market, PDC has pioneered solutions to meet the MRI and imaging market’s needs – beginning with shielding many of the first MRI suites to speed this exciting new technology to patients. But we didn’t stop there. We are innovators, passionately focused on advancing comfort and quality for patients and caregivers alike with simplified solutions from the relocatable Cassette® to Caring Suite® patient experience suites to new In-Bore Viewing Solutions and UV-C disinfection technology – designed just for imaging. Journey through 40 years of PDC innovation, and discover how our entrepreneurial spirit and creative approach to patient well-being can help you care for patients better and successfully address your business challenges.
Company Logo

American Environmental Aviation, Inc.

Alabama • Alaska • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • Florida • Georgia • Hawaii • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Engineer, General Contractor, Specialty Contractor
Commercial, Industrial and Energy, Infrastructure, Institutional
Airfield Construction, Architectural Design and Engineering, Civil Design and Engineering, Contaminated Soils Abatement and Remediation, Design and Engineering, Design Coordination Services, Electrical Design and Engineering, Existing Conditions Assessment, Facility Fuel Systems, Fuel Oil Detection and Alarm, General Construction Management, Informational Kiosks, Liquid Fuel Process Piping, Mechanical Design and Engineering, Process Gas and Liquid Handling Purification and Storage Equipment, Project Management and Coordination, Special Facility Components, Specialized Systems, Specialty Element Construction, Storage Specialties, Underground Storage Tank Removal, Welding and Cutting Gases Piping
From concept to completion, AEAV has the experience to anticipate what you really need (and don't need) for a complete aviation fueling system. Our business success has been built upon the unique blend of design, construction, and installation capabilities we offer, enabling us to deliver comprehensive service throughout the life cycle of your project. Complete Aviation Fuel Farm Design. Fuel Farm Refurbishment. Turnkey Aviation Fuel Systems. Aviation Fueling Systems from Concept to Completion. Jet Fuel, AV Gas, MoGas, Diesel, Fuel Tank Skids, Pump & Filters, Fuel Containment, Jet fueling systems, Electric Tank Gauging, Sump Recovery Systems, Catwalk Systems, Fuel Storage Systems, Above & Underground Fuel Storage Systems, NFPA 407 Regulations. Services Provided Nationwide
Company Logo

Taylor Corporation

Alabama • Arkansas • Georgia • Louisiana • Mississippi • North Carolina • South Carolina • Tennessee
General Contractor
Commercial, Industrial and Energy, Infrastructure, Institutional
Concrete, Demolition, Earthwork, General Construction Management, Project Management and Coordination
COMPANY OVERVIEW AND MISSION STATEMENT Taylor Corporation has been in business since 1969. The company started out as a small excavating company that specialized in concrete work, grading projects, clearing projects and utility work. By the late 1970’s the company was also performing mechanical projects and industrial projects. And by the end of the 1980’s we were constructing water and wastewater treatment plants and performing environmental work along with the heavy civil projects. We have constructed projects in municipal solid waste landfills, C&D landfills, industrial access roads, water treatment plants, wastewater treatment plants, potable water transmission lines up to 36” in diameter, raw water intake lines up to 48” in diameter, fire protection lines, sanitary sewer lines (gravity and force main), process sewer lines (including outfall and pretreatment lines), methane gas mains, storm sewer lines, railroad industrial spurs and loops, large site grading projects up to 1,500,000 CY, Environmental Projects with direct EPA Oversite, Sanitary Lift Stations up to 40’ Deep, Erosion Control and Stabilization Projects, Tank Farms, Tunnel Construction Project, Asphalt Paving Projects, and Cast-in-place Concrete Projects (box culverts, retaining walls, tilt-up buildings, concrete paving, etc.). We are the process of completing a $120,000,000 Rendering Plant for Tyson Foods in Hanceville, Alabama. Over 70% of our work is from repeat customers. That is something that we take great pride in and continue to work hard everyday to continue those relationships. Mission Statement - Taylor Corporation is dedicated to providing quality construction, technical and management services to our customers. We will strive to implement a long term relationship with our clients, based on safety, quality, timely service and an anticipation of their needs. To help fulfill this mission, we will treat all employees fairly and involve them in the quality improvement process to insure responsiveness and cost effective work execution.
Company Logo

Siemens Energy, Inc

Alabama • Alaska • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • District of Columbia • Florida • Georgia • Hawaii • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Architect, Engineer, General Contractor, Specialty Contractor
Commercial, Healthcare, Industrial and Energy, Infrastructure, Institutional
Bim and Model Making Services, Design and Engineering, Electrical, General Construction Management, Project Management and Coordination
At Siemens Energy, our mission is to empower our customers to meet the growing global demand for energy while transitioning to a more sustainable world. How? Our innovative technologies, extensive energy experience and an ambitious strategy to decarbonize global energy systems are all central to our efforts to be the partner and driver of the energy transition. And our top focus areas in ESG, innovation and transformation share how we're making the future of tomorrow different today, for both our partners - and our people.
Company Logo

CES, Inc.

Alabama • Arizona • Arkansas • California • Colorado • Florida • Georgia • Illinois • Indiana • Kansas • Kentucky • Louisiana • Mississippi • Missouri • Nevada • New Mexico • North Carolina • Ohio • Oklahoma • Pennsylvania • South Carolina • Tennessee • Texas • Utah • Virginia • West Virginia • Wyoming
Consultant
Commercial, Healthcare, Industrial and Energy, Infrastructure, Institutional
Airfield Construction, Appraisers and Valuation Services, Aquariums, Communications, Concrete, Concrete Finishing, Construction Scheduling, Curbs Gutters Sidewalks and Driveways, Earthwork, Electrical, Electrical Utilities High and Medium Voltage Distribution, Electronic Security, Estimating, Existing Conditions Assessment, Fire Suppression, Furnishings, General Commissioning Requirements, HVAC General, Integrated Automation Systems For Conveying Equipment, Masonry, Metals, Other Conveying Equipment, Planetariums, Plumbing, Preconstruction Bidding, Project Management, Project Management and Coordination, Roadway Construction, Sidewalks, Thermal Insulation, Value Analysis Engineering
Computerized Estimating Services (CES) is a Women-Owned firm established in 1988. We are certified as SBE, SBA, WBENC, and WOSB. We specialize in commercial construction cost estimating and scheduling services across the United States. We serve architects, owners, developers, and general contractors in both the private and public sectors. At CES, our mission is to deliver every project with precision and provide our clients with peace of mind. We approach each endeavor with integrity and intention, always striving to “count the cost” to make each client's vision a reality — ensuring thoughtful planning, transparent communication which results in seamless execution of the project from start to finish. At the start of each project, CES collaborates closely with the client and design team to thoroughly evaluate the scope of work for each discipline. We engage with the design teams from the earliest stages of document development, during which we: - Evaluate unique project requirements, including utilities, grading, storm drainage, and traffic flow. - Identify existing above- and below-grade structures that may need to be removed. We conduct comprehensive research on relevant site conditions in collaboration with the design team, ensuring all factors are seamlessly integrated into the estimate. Our estimates adhere to the MasterFormat standard at every design phase, leveraging tools like BlueBeam, RSMeans, CAD, and MII to deliver: ✔ Clear summary sheets ✔ Detailed exclusions and clarifications ✔ Itemized general conditions ✔ Detailed comprehensive pricing breakdown - Collaboration Review: Draft estimates are shared via email for client review, and any agreed-upon revisions promptly incorporated into the final version. - Clear Communication: Scope-related questions are addressed directly with the client’s team, fostering transparency and accountability. - Market-Driven Pricing: Estimates reflect current local market conditions, with distinct escalation factors applied for projected start dates to midpoint of construction. - Transparent Contingencies: A clear design contingency is included and adjusted as the project evolves, with no hidden costs. - Change Tracking: Estimates beyond the Schematic Design Phase include a CSI 50-Division comparison column to clearly track changes from prior versions.
Company Logo

Norandex Building Products

Alabama • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • Florida • Georgia • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Supplier
Commercial, Residential
Board Insulation, Doors and Frames, Exterior Insulation and Finish Systems Eifs, Flashing and Trim, Metal Windows, Plastic Windows, Pressure Resistant Windows, Siding, Vents, Water Drainage Exterior Insulation and Finish System, Water Repellents, Waterproofing, Weather Barriers, Windows, Wood Windows
One Source, One Brand for all your exterior sidewall needs" The Norandex brand of exterior building products has focused on making the dreams of American homeowners come true with siding, windows, doors and other exterior products in a vast array of styles and colors. Exclusively through ABC Supply Co., Inc., Norandex offers the highest quality residential and light commercial products to professional builders and contractors. Our product line is ideal for remodeling, new construction, and light commercial projects. We encourage you to review our products, search for the colors and styles that excite you, and contact us for more details.
Company Logo

The Element Group

Alabama • Alaska • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • Florida • Georgia • Hawaii • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Consultant
Commercial
3d Capture Scanning, Architectural Design and Engineering, Decorative Finishing, Design and Engineering, Design Coordination Services, Interior Design, Project Management and Coordination, Signage
The Element Group is a full-service design-build and branch transformation firm that works with community banks and credit unions nationwide. Guided by its “Every Bit Matters” philosophy, the firm partners with financial institutions to plan, design, and deliver future-facing retail branch environments that support growth, operational efficiency, and brand differentiation. The Element Group provides end-to-end services including branch strategy, architectural and interior design, construction management, brand integration, digital signage, custom millwork, and staff training. With deep expertise in financial services and a collaborative, turnkey approach,

LightSett, LLC

DC, DC • Alabama • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • Florida • Georgia • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Engineer, General Contractor, Specialty Contractor, Supplier
Commercial, Industrial and Energy, Infrastructure, Residential
3d Capture Scanning, Architectural Design and Engineering, Bored Piles, Communications, Communications Utilities Distribution, Construction Scheduling, Data and Voice Communications, Design and Engineering, Design Coordination Services, Electrical Design and Engineering, Excavation and Fill, Technology Design and Engineering, Traffic Control
LightSett, LLC is a Engineer, General Contractor, Specialty Contractor, Supplier that serves the Hendersonville, NC area and specializes in 3d Capture Scanning, Architectural Design and Engineering, Bored Piles, Communications, Communications Utilities Distribution, Construction Scheduling, Data and Voice Communications, Design and Engineering, Design Coordination Services, Electrical Design and Engineering, Excavation and Fill, Technology Design and Engineering, Traffic Control.

Frequently Asked Questions

How many Project Management and Coordination contractors in Stem, NC are on the Procore Construction Network?

There are currently 2,885 Project Management and Coordination contractors in Stem, NC on the Procore Construction Network.

How can I find and connect with Project Management and Coordination contractors in Stem, NC?

The Procore Construction Network allows you to search for Project Management and Coordination contractors in Stem, NC that meet your business needs. Most companies provide a phone number or website on their business page so you can easily connect with them.

How can Project Management and Coordination contractors in Stem, NC join the Procore Construction Network?

The Procore Construction Network is free and open to any businesses in the construction industry. Click Sign Up at the top of this page to submit your information and create your business page.

How do I know what areas Project Management and Coordination contractors in Stem, NC cover?

Most businesses listed on the Procore Construction Network have updated their service area. Select a business to view a service area map and find what other areas they work in.

How do I invite Project Management and Coordination contractors in Stem, NC on the Procore Construction Network to bid on projects?

The Procore platform offers a Bidding tool to Procore customers. If your company uses our Bidding solution, you can search and invite businesses on the Procore Construction Network directly from the Bidding tool. Not yet using Procore? Request a demo.

How many Project Management and Coordination contractors in Stem, NC are on the Procore Construction Network?

There are currently 2,885 Project Management and Coordination contractors in Stem, NC on the Procore Construction Network.

How can I find and connect with Project Management and Coordination contractors in Stem, NC?

The Procore Construction Network allows you to search for Project Management and Coordination contractors in Stem, NC that meet your business needs. Most companies provide a phone number or website on their business page so you can easily connect with them.

How can Project Management and Coordination contractors in Stem, NC join the Procore Construction Network?

The Procore Construction Network is free and open to any businesses in the construction industry. Click Sign Up at the top of this page to submit your information and create your business page.

How do I know what areas Project Management and Coordination contractors in Stem, NC cover?

Most businesses listed on the Procore Construction Network have updated their service area. Select a business to view a service area map and find what other areas they work in.

How do I invite Project Management and Coordination contractors in Stem, NC on the Procore Construction Network to bid on projects?

The Procore platform offers a Bidding tool to Procore customers. If your company uses our Bidding solution, you can search and invite businesses on the Procore Construction Network directly from the Bidding tool. Not yet using Procore? Request a demo.