Project Management and Coordination Contractors in Stem, NC

2,827 Results within

Market Sector
Company Type
Business Classification
Trades and Services (39)
Construction Scheduling
Design Coordination Services
Detention Security Systems
Direct Applied Finish Systems
Exterior Insulation and Finish Systems Eifs
General Construction Management
Information Management and Presentation
Integrated Automation Actuators and Operators
Integrated Automation Battery Monitors
Integrated Automation Compressed Air Supply
Integrated Automation Control and Monitoring Network
Integrated Automation Control Dampers
Integrated Automation Control Valves
Integrated Automation Current Sensors
Integrated Automation Kw Transducers
Integrated Automation Lighting Relays
Integrated Automation Local Control Units
Integrated Automation Network Devices
Integrated Automation Network Gateways
Integrated Automation Power Meters
Integrated Automation Sensors and Transmitters
Integrated Automation Software
Integrated Automation Systems For Communications
Integrated Automation Systems For Conveying Equipment
Integrated Automation Systems For Electrical
Integrated Automation Systems For Electronic Safety
Integrated Automation Systems For Electronic Security
Integrated Automation Systems For Facility Equipment
Integrated Automation Systems For Fire Suppression
Integrated Automation Systems For HVAC
Integrated Automation Systems For Network Equipment
Integrated Automation Systems For Plumbing
Integrated Automation Ups Monitors
Polymer Based Exterior Insulation and Finish System
Polymer Modified Exterior Insulation and Finish System
Project Management and Coordination
Specialized Systems
Value Analysis Engineering
Water Drainage Exterior Insulation and Finish System
Clear All Filters
Company Logo

Berg Group

Alabama • Arizona • California • Colorado • Florida • Georgia • Illinois • Indiana • Iowa • Michigan • Minnesota • Mississippi • Montana • North Carolina • North Dakota • Ohio • Oregon • South Carolina • South Dakota • Tennessee • Texas • Washington • Wisconsin
Specialty Contractor
Commercial, Healthcare, Industrial and Energy, Infrastructure, Institutional
Acoustic Ceilings, Air Barriers, Applied Fire Protection, Blanket Insulation, Board Insulation, Building Information Modeling Bim, Ceilings, Cement Plastering, Direct Applied Finish Systems, Estimating, Exterior Insulation and Finish Systems Eifs, Fabricated Wall Panel Assemblies, Fiber Cement Siding, Firestopping, Gypsum Board, Gypsum Plastering, Integrated Construction, Interior Specialties, Joint Sealants, Metal Faced Panels, Metal Wall Panels, Painting, Painting and Coatings, Partitions, Plaster and Gypsum Board, Plaster and Gypsum Board Assemblies, Preconstruction Bidding, Project Management and Coordination, Rough Carpentry, Sheathing, Thermal Insulation, Wall Coverings, Wood Framing
Berg Group is a Specialty Contractor that serves the Chaska, MN area and specializes in Acoustic Ceilings, Air Barriers, Applied Fire Protection, Blanket Insulation, Board Insulation, Building Information Modeling BIM, Ceilings, Cement Plastering, Direct Applied Finish Systems, Estimating, Exterior Insulation and Finish Systems Eifs, Fabricated Wall Panel Assemblies, Fiber Cement Siding, Firestopping, Gypsum Board, Gypsum Plastering, Integrated Construction, Interior Specialties, Joint Sealants, Metal Faced Panels, Metal Wall Panels, Painting, Painting and Coatings, Partitions, Plaster and Gypsum Board, Plaster and Gypsum Board Assemblies, Preconstruction Bidding, Project Management and Coordination, Rough Carpentry, Sheathing, Thermal Insulation, Wall Coverings, Wood Framing.
Company Logo

Rheo Engineering

Alabama • Alaska • Alberta • Arizona • Arkansas • British Columbia • California • Colorado • Connecticut • Delaware • Florida • Georgia • Hawaii • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Manitoba • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Brunswick • New Hampshire • New Jersey • New Mexico • New York • Newfoundland and Labrador • North Carolina • North Dakota • Nova Scotia • Ohio • Oklahoma • Ontario • Oregon • Pennsylvania • Prince Edward Island • Québec • Rhode Island • Saskatchewan • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Supplier
Healthcare, Industrial and Energy
Bulk Material Processing Equipment, Container Processing and Packaging, Design and Engineering, Equipment, Healthcare Equipment, Integrated Automation Systems For Conveying Equipment, Integrated Construction, Manufacturing Equipment, Material Lifts, Mechanical Design and Engineering, Mobile Plant Equipment, Other Conveying Equipment, Piece Material Handling Equipment, Platform Lifts
Rheo is a leading industry resource in customized engineering controls relating to GMP material handling, containment, and process technology systems. Rheo excels at providing successful solutions to complex material handling process challenges. Our team helps our customers produce their products safely, efficiently, and reliably by designing and manufacturing the best powder handling systems on the market. Rheo serves a global client base with headquarters in the United States, an office in Germany, and multiple distributors.
Company Logo

M.J. Harris Construction Services, LLC

Alabama • Alaska • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • Florida • Georgia • Hawaii • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
General Contractor
Commercial, Healthcare, Institutional
3d Capture Scanning, Building Information Modeling Bim, Estimating, General Construction Management, Preconstruction Bidding
M.J. Harris Construction Services, LLC was founded in 1995 for a single purpose: to provide Owners with a highly skilled group of professional constructors who are committed to the process of delivering highly successful projects. As one of the premier Healthcare CM / GCs in the Country, M.J. Harris provides exceptional comprehensive preconstruction and Construction services to our clients in the Healthcare and Institutional market sectors. We service our clients and specialize in both new ground-up “greenfield” projects as well as intricate renovation projects within fully operational facilities. In either case, M.J. Harris has the trained, experienced staff to carry out the effort and ensure success. Many of our team members are ASHE and CHC certified, and all are well versed in ILSM and ICRA procedures and processes, MEP and special systems as well as safety which is always held paramount and vital for a projects success. Our team of construction experts have successfully completed Healthcare projects of all types including: acute care hospitals, rehabilitation hospitals, women & children’s hospitals, behavioral health facilities, oncology centers, MOBs, outpatient surgery and imaging centers as well as emergency departments to name just a few. Since our inception, our teams have built tens of millions of square feet in over forty (40) States and have served as CM/GC on over 750 projects totaling $7.2 billion in Healthcare construction throughout the Country. We have completed projects ranging in size from $150,000 to $150,000,000 and we understand what healthcare providers need in order to provide highest levels of quality, patient-centered care. M.J. Harris currently employs over 120 employees through our three (3) strategic offices with disciplines ranging from administration to safety, preconstruction services, building information modeling (BIM / VDC) and field operations.

AEI-Design Build LLC

DC, DC • Maryland • New Jersey • North Carolina • Pennsylvania • Virginia
Architect, Consultant, Engineer, General Contractor, Owner Real Estate Developer, Specialty Contractor
Commercial, Healthcare, Industrial and Energy, Infrastructure, Institutional, Residential
Built Up Bituminous Waterproofing, Ceilings, Concrete, Concrete Paving, Countertops, Curbs and Gutters, Curbs Gutters Sidewalks and Driveways, Demolition, Design and Engineering, Design Coordination Services, Door and Window Hardware, Door Hardware, Doors and Frames, Driveways, Electrical, Erosion and Sedimentation Controls, Estimating, Finish Carpentry, Fire and Smoke Protection, Fire Suppression, Flooring, General Construction Management, Heating Ventilating and Air Conditioning HVAC, Interior Design, Job Site Data Collection and Reporting, Masonry, Mechanical Design and Engineering, Membrane Roofing, Metals, Painting and Coatings, Plaster and Gypsum Board, Plastic Composite Fabrications, Plumbing, Project Management, Project Management and Coordination, Roof and Deck Insulation, Roofing, Rough Carpentry, Sprayed Insulation, Structural Steel, Tile, Value Analysis Engineering, Wall Finishes
AEI-Design Build LLC is a Architect, Consultant, Engineer, General Contractor, Owner Real Estate Developer, Specialty Contractor that serves the Randallstown, MD area and specializes in Built Up Bituminous Waterproofing, Ceilings, Concrete, Concrete Paving, Countertops, Curbs and Gutters, Curbs Gutters Sidewalks and Driveways, Demolition, Design and Engineering, Design Coordination Services, Door and Window Hardware, Door Hardware, Doors and Frames, Driveways, Electrical, Erosion and Sedimentation Controls, Estimating, Finish Carpentry, Fire and Smoke Protection, Fire Suppression, Flooring, General Construction Management, Heating Ventilating and Air Conditioning HVAC, Interior Design, Job Site Data Collection and Reporting, Masonry, Mechanical Design and Engineering, Membrane Roofing, Metals, Painting and Coatings, Plaster and Gypsum Board, Plastic Composite Fabrications, Plumbing, Project Management, Project Management and Coordination, Roof and Deck Insulation, Roofing, Rough Carpentry, Sprayed Insulation, Structural Steel, Tile, Value Analysis Engineering, Wall Finishes.
Company Logo

Wavelogix, Inc.

Alabama • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • Florida • Georgia • Hawaii • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Supplier
Commercial, Industrial and Energy, Infrastructure, Institutional
Bridge Specialties, Bridges, Cementitious Wall Panels, Civil Design and Engineering, Concrete, Concrete Accessories, Concrete Paving, Concrete Supply and Delivery, Construction Scheduling, Fabricated Bridges, Fabricated Engineered Structures, Fabricated Wall Panel Assemblies, General Construction Management, Industry Specific Manufacturing Equipment, Pre Cast Concrete, Precast Concrete Retaining Walls, Project Management, Roadway Construction, Roadway Equipment
Wavelogix revolutionizes concrete strength monitoring with the REBEL® Concrete Strength Sensing System, delivering real-time, accurate data up to 56 days and beyond. Using advanced acoustical resonance technology, the system is calibration-free, independent of mix design, moisture, and temperature. The REBEL System is AASHTO T412-compliant, ensuring reliable performance with lower variability than traditional methods. It acts as an insurance policy, resolving discrepancies across core samples, cylinders, and beams. By enabling precise project timing and earlier payments, Wavelogix saves time, money, and manpower while offering competitive pricing and empowering smarter decision-making in the construction industry. Calibration-Free, Real-Time Data, Proven Reliability, Cost and Time Efficiency, Standards-Compliant, "Know When to Break", Project Advancement, Discrepancy Resolution, Competitive Pricing

Frequently Asked Questions

How many Project Management and Coordination contractors in Stem, NC are on the Procore Construction Network?

There are currently 2,827 Project Management and Coordination contractors in Stem, NC on the Procore Construction Network.

How can I find and connect with Project Management and Coordination contractors in Stem, NC?

The Procore Construction Network allows you to search for Project Management and Coordination contractors in Stem, NC that meet your business needs. Most companies provide a phone number or website on their business page so you can easily connect with them.

How can Project Management and Coordination contractors in Stem, NC join the Procore Construction Network?

The Procore Construction Network is free and open to any businesses in the construction industry. Click Sign Up at the top of this page to submit your information and create your business page.

How do I know what areas Project Management and Coordination contractors in Stem, NC cover?

Most businesses listed on the Procore Construction Network have updated their service area. Select a business to view a service area map and find what other areas they work in.

How do I invite Project Management and Coordination contractors in Stem, NC on the Procore Construction Network to bid on projects?

The Procore platform offers a Bidding tool to Procore customers. If your company uses our Bidding solution, you can search and invite businesses on the Procore Construction Network directly from the Bidding tool. Not yet using Procore? Request a demo.

How many Project Management and Coordination contractors in Stem, NC are on the Procore Construction Network?

There are currently 2,827 Project Management and Coordination contractors in Stem, NC on the Procore Construction Network.

How can I find and connect with Project Management and Coordination contractors in Stem, NC?

The Procore Construction Network allows you to search for Project Management and Coordination contractors in Stem, NC that meet your business needs. Most companies provide a phone number or website on their business page so you can easily connect with them.

How can Project Management and Coordination contractors in Stem, NC join the Procore Construction Network?

The Procore Construction Network is free and open to any businesses in the construction industry. Click Sign Up at the top of this page to submit your information and create your business page.

How do I know what areas Project Management and Coordination contractors in Stem, NC cover?

Most businesses listed on the Procore Construction Network have updated their service area. Select a business to view a service area map and find what other areas they work in.

How do I invite Project Management and Coordination contractors in Stem, NC on the Procore Construction Network to bid on projects?

The Procore platform offers a Bidding tool to Procore customers. If your company uses our Bidding solution, you can search and invite businesses on the Procore Construction Network directly from the Bidding tool. Not yet using Procore? Request a demo.